AAG4 AMPOULE DRAWING

FILLING & SEALING MACHINE

Code: 6-3-1

The machine is a new generation of the ampoule drawing, filling and sealing combined equipment for injections. It adopts the rectangular feeding instead of the traditional ampoule feeding methods. In such case, the feeding is steady with no easy broken ampoule. A modern clutch is mounted under the ampoule feed hopper. Therefore, the ampoule feeding can be stopped at any time while the machine is still running. So the ampoule lost can be reduced. In the part of stopping filling where changes electromagnetic switch into mechanical switch. It is reliable and durable. Bottle reverse and bottle arranging structure are used in the device of bottle outlet. It reduces the broken rate of the finished products of ampoules tremendously.

Main Technical Specifications:

ABG ANTIBIOTIC VIAL LIQUID FILLING MACHINE

1. Characteristic:

This machine can automatically fill liquid and stopple the Rubber stopper. It is designed and manufactured according to the GMP regulation.

The machine is indispensable equipment in the production line of processing the liquid and freeze-drying vial.

2. Capacity: 30-100 vials/min.

3.Applicable bottle: 5-25ml, 50-500ml

4. Filling head: one, two

5. Filling dosage: 2-20ml, 50-500ml

6. Dosage tolerance: ≤1%

7. Rate of stoppling error: ≤0.3%

8. Power: 1kw 380v/50Hz

9. Dimension : L*W*H1120*800*1410mm

1800*950*1600mm

10. Weight: apper .250kg, 400kg

AGF Type 6-AmpouleFilling–Sealing Machine

Code: 6-2-1

The 6-ampoule filling-sealing machine AGF is more suitable for the technological requirements of water and powder injections. It features high capacity, good quality, stable operation, and so it is ideal equipment for ampoule medicine production.

• Upside of the filling –sealing machine is set of one hundred stage laminar flow purify in protection.
• Thee is set to prevent from filling on filling –sealing machine
• Liquefaction gas and oxygen is adopted as filling burning gas on Filling –sealing machine.
• Stand-rotation sealing is adopted on Filling –sealing machine, sealing quality is good.
• Tiny-adjustment is adopted for filling on filling –sealing machine; error is smaller in filling value.
• Under the control of buffer, filling-sealing machine can mater with production.

Operating Theory

Ampoule-bottles are putted into passage for bottle entrance in bulk by the transmission belt of AGF mold 6-ampoule filling –sealing machine, under the control of barrier six ampoule-bottles are segregated every time, then carried to filling unit and stealing by teeth-plate in interval. The filling and stealing is under the protect of one hundred stage lamina flow. Sealed ampoule-bottle is putted outside bottle-pusher.

Technical Data:

• Power: 380V, 50Hz
• Gross power of motor: 1.5kw
• Volume of liquid gas: 1.2m3/h
• Volume of oxygen gas: 0.6m3/h

ALG ⅡDouble Injection Ampoule Filling and Sealing Machine

Code: 6-4-6

Main Purpose:

 This machine is used to seal and fully close the glass bottles after filling in pharmaceutical and chemical fields in pharmaceutical and chemical fields. It is measured by piston dosing pump and can be stopped filling automatically when lacking of bottles. Sealing may use coal gas or evaporation petroleum.

Main parameter:

GCS MODEL LINEAR TYPE LIQUID FILLING MACHINEUsage & Brief Introduction

The machine is applied in filling & capping such liquid as plastic bottles and glass, a main filling & capping set for oral liquid, syrup and living things products. It suitable to filling & plugging for 30-200ml bottles. It features compact structure and high efficiency by adopting a high precision adjustable stainless steel measuring pump with up to cushion filling and magnetic oscillator is automatic cap delivering, partial linear filling can be used for 200-500ml bottles. It meets the requirement of GMP.

Main Technical Parameters

• Capacity: 60-120 bottles/min

40-60 bottles/min( Large Bottles)

• Range of Bottles: 30-200ml Plastic bottles and glass of other specification can be tailor-made
• Measuring Precision: meets state pharmacopoeia
• Rate of Plugging: ≥99%
• Power supply: 380V, 50HZ, 3phases with 4 line
• Power: 1kw

GFP AUTOMATIC LIQUID FILLING

MACHINE

Usage and Features:
Automatic anti-pressure liquid filling machine is a specially designed filling machine based on advanced technology and imported electrical components from Japan, adopting the ways of vacuum filling to fill all various of overflow products with high accuracy and versatility, such as juice, milk, tea, and sauce oil, etc. ensure filling without leakage, no foam and damaged bottle is no incorporated. Automatic speed variation adjustment makes operation more convenient and reliable. Vertical stainless steel safety guards all around the machine. It’s a good choice for modernized production.

GP-C-2 Semi-Auto Filling Machine

This machine is designed for some factories that need the low output product, it can automatic control the level of liquid, with the jigger to measure and the poise adjusting, the measure precision <2%. It is up-down by pneumatic cylinder controlling, operate easily, only one person can operate it.

Specification

Capacity: For 100ml bottle, 1500 bottles/h

Air consumption: 0.12m3/min

Suitable bottle nozzle inner diameter: φ20mm above

Suitable bottle: 50ml~2000ml

Overall dimension: 650X240X1800mm

Weight: 100kg